Yealink
This instruction explains, how to start a network and a SIP-trace on Yealink end devices and DECT bases.
More information can be found here.
Not every Yealink device is explained here.
The following instruction is about the Web Interface of the device. To access this interface, enter the IP-Address of Your Device in the Browser.
- e.g.
http://192.168.80.111
Open Trace menu
- Yealink T53
- Yealink T46S
Open the menu "Pcap" in the tab "Settings" and under "Configuration".
Open the menu "Pcap" in the tab "Settings" and under "Configuration".
Choose PCAP type
- Yealink T53
- Yealink T46S
The dropdown menu "Pcap Type" shows two Options:
- "Normal": The capture gets saved on the Device and can be downloaded via "Export".
- "Enhanced": The capture gets downloaded after terminating it.
Choose the Option "Normal".
The dropdown menu "Pcap Type" shows two Options:
- "Normal": The capture gets saved on the Device and can be downloaded via "Export".
- "Enhanced": The capture gets downloaded after terminating it.
Choose the Option "Normal".
Start capture
- Yealink T53
- Yealink T46S
Start the capture with the button "Start".
Start the capture with the button "Start".
Stop capture
- Yealink T53
- Yealink T46S
End the capture using "Stop".
End the capture using "Stop".
Download file
- Yealink T53
- Yealink T46S
Afterwards download the capture as a PCAP file with the button "Export".
Afterwards download the capture as a PCAP file with the button "Export".
