Mitel
This instruction explains, how to start a network and a SIP-trace on Mitel end devices and DECT bases.
More information can be found here.
Not every Mitel device is explained here.
The following instruction is about the Web Interface of the device. To access this interface, enter the IP-Address of Your Device in the Browser.
- e.g.
http://192.168.80.111
Open Trace menu
- Mitel 6867i
Open the menu "Capture" in the tab "Advanced Settings".
Choose Port
- Mitel 6867i
Mitel allows capturing of specific ports. The "Port" field can also be left empty, to make a complete capture of the network pakets.
Apply the changes by clicking the button "Save settings".
Set Timeout
- Mitel 6867i
Additionally, You can set the timeout of the capture, although it can be manually overwritten.
Start capture
- Mitel 6867i
Initiate the capture with the button "Start".
This shows "Provisioning complete" inside the WebUi, and then You can click "Capture" in the tab "Advanced Settings" again to go back.
Stop capture
- Mitel 6867i
End the capture using "Stop".
This again shows "Provisioning complete" inside the WebUi, where You can again click on "Capture" in the tab "Advanced Settings".
Download file
- Mitel 6867i
Afterwards download the capture as a PCAP file using "Save As..".
