Skip to main content

Yeastar TA200 / TA100

This installation guide explains how to configure your analog telephony adapter from Yeastar/Tiptel using the web interface. To access the web interface, enter your device's IP address into the address bar of your web browser.

If you are unsure how to locate your device's IP address, refer to the instructions or information provided in the manufacturer's manual.

Installation​

Before you begin the installation, make sure that you:

  • Have an active internet connection
  • Own an analog telephone
  • Have access to a computer to configure the Yeastar TA200/100

Now, start the network installation and follow these steps:

  1. Connect your telephone to the "PHONE 1" port of your Yeastar TA200/100 using a telephone cable (RJ-11).
  2. Connect the RJ-45 port of your Yeastar TA200/100 to your network using a network cable.
  3. Connect the Yeastar TA200/100 to the power supply using the provided power adapter.
  4. Lift the handset of the telephone connected to the Yeastar TA200/100.
  5. Dial *** followed by the number 1 to retrieve the IP address.
  6. Write down the displayed IP address.

Configuration​

Open your internet browser. Enter the recorded IP address into the address bar and press the Enter key. Log in to your Yeastar TA200/100 using the following credentials:

  • User Name: admin
  • Password: password

Click on "System" in the top right corner, then select "LAN Settings" from the menu on the left and set a static IP address.

Click on "Gateway" in the top right corner, then select "SIP Settings" from the menu on the left. Open the "NAT" tab, enter the static IP address you set earlier in the "External IP Address" field and change the "NAT Mode" dropdown menu to "never". Finally, click the "Save" button to save your changes.

Click on "FXS Port" in the menu on the left, then click the edit icon (pencil) on the row of the port you want to configure.

Now, enter the configuration details for the phone number you want to register as follows:

  • Register Mode: Select "Port Register"
  • Caller ID Name: <Username> or the name to be displayed
  • Caller ID Number: <Username>
  • User Name: <Username>
  • Authentication Name: <Username>
  • Password: <VoIP-Password>
  • From User: <Username>
  • DID Number: <Username>
  • Transport: Select "UDP"
  • Hostname/IP: <SIP-Server>
  • Domain: <SIP-Server>
  • Authenticating Incoming Call: Select "No"
  • Realm: This field can be left blank
  • Failover Hostname/IP: This field can be left blank

Click the "Save" button to save your entries.

Open the "Advanced" tab and make the following adjustments:

  • Keep Alive Type: Select "Options"
  • Enable Random Port: Uncheck (disable) the option
  • First Codec: Select "a-law"
  • Second Codec: Select "u-law"

Click the "Save" button to save the adjustments.

Starten Sie das Gerät nach abgeschlossener Konfiguration neu. Klicken Sie hierfür oben rechts erneut auf "System", danach links auf den Menüpunkt "Zurücksetzen und neu starten" -> "Neustart".

Optional​

Firewall​

Restart the device after completing the configuration. To do this, click on "System" in the top right corner, then select "Reset and Reboot" -> "Reboot" from the menu on the left.

Optional​

Firewall​

The Yeastar TA200 includes a built-in firewall, which is disabled by default. You can define the firewall rules under "System" -> "Firewall Rules."

When a phone number is registered, the device automatically creates a new firewall rule. This rule is named "autop-VoipServerX" and should not be deleted.

To use this firewall, add a new rule with the following configuration by clicking the "Add Rule" button:

  • Name: Allow_HTTP_Access_LAN
  • Description: Allow HTTP access from LAN
  • Protocol: TCP
  • Port: 80 : 80
  • IP: (Local Network) / (Corresponding Network Mask)
  • MAC Address: (Leave blank)
  • Action: Accept

This rule allows access from your local network to the web interface of the Yeastar TA200. Additionally, in the "General Settings", you must enable the options "Enable Firewall" and "Drop All" (check the boxes) for the firewall to function properly. Then, click the "Save" button and "Apply Changes" in the top-right corner.

Testing​

Now test your VoIP phone by making both an incoming and outgoing call.

Calls to other sipcall numbers are possible without credit, while calls to paid landline or mobile networks require a sufficient balance on your sipcall account.

If you encounter any issues, our customer service team is happy to assist you.