Gigaset P8xx / P7xx
This installation guide explains the phone configuration of your device via the web interface. To access the web interface, enter the IP address of your device into the address bar of your web browser.
If you do not know how to locate the IP address of your device, please refer to the instructions/information in the manufacturer's manual.
Registration
Access your device via the IP address. On the left side, click on the identity where you want to configure a sipcall phone number.
The configuration data can be found in the customer portal under "Phone numbers" -> "Phone number overview". Click on the desired phone number to view the configuration data (within the "SIP-Data" card).
Displayname: <Username>
Account: <Username>
Password: <VoIP-Password>
Registrar: <SIP-Server>
To confirm these entries, click the "Apply" button at the bottom left.
Configuration
This device uses SIP port UDP 5060 by default for call signaling
and RTP ports UDP 49152-65534 for voice data transmission.
Keepalive
Click on the "NAT" tab.
Now enter the value "10" in the "Keepalive Interval (s)" field. To apply this entry, click the "Apply" button at the bottom left. After that, a bar will appear at the top. Save the applied entries by clicking the "Save" button.
Codec
Next, open the "RTP" tab.
Copy the following entry into the "Codec" field: g722,pcma,pcmu,telephone-event
Disable the two settings "Symmetrical RTP" and "RTP Encryption". To apply these adjustments, click the "Apply" button at the bottom left. After that, a bar will appear at the top. Save the applied adjustments by clicking the "Save" button.
Refer-To
Next, open the "SIP" tab.
Enable the "Refer-To Brackets" setting. To apply this adjustment, click the "Apply" button at the bottom left. After that, a bar will appear at the top. Save the applied adjustments by clicking the "Save" button.
BLF-Setup (optional)
Details
For BLF to function, all devices in use must be registered on the same SIP server.
This function is optional and does not need to be configured. With this BLF (Busy Lamp Field) setup, the following functions are configured:
- Presence Management (Status display)
- Call pickup
This option is only available for sipcall collective accounts (sipcall pro, sipcall business and sipcall callcenter).
Access your device via the IP address. After logging in, select the "Function Keys" menu to configure BLF.
Now select a key where you want to configure the BLF.
Context: Configured Identity *
Type: BLF
Number: Monitored number **
* Here, select the line to which the BLF should refer, meaning the line with which you can pick up the call.
** Define in this field which phone number should be monitored. Please enter a string structured as follows:
<sip:[Number to be monitored]@[Server where the number is registered];user=phone>|*40
Example: sip:41442005001@free1.voipgateway.org;user=phone|*40
Confirm your entries by clicking the "Apply" button.
Enable prompting when transferring calls
Details
The behavior when transferring calls can be controlled. Without adjustment, the call is transferred directly and without prompting. If you want to prompt when transferring (transferring) a call, please make the following adjustment.
Access your device via the web interface. After logging in, click on the "Advanced" menu item on the left side, and then click on "Behavior" below it.
Here, the option "Behavior of Transfer Key in Transfer" can be set to "Attended Transfer".
Save the adjustment by clicking "Apply".
Testen
Now test your VoIP phone by making both an incoming and outgoing call.
Calls to other sipcall numbers are possible without credit, while calls to paid landline or mobile networks require a sufficient balance on your sipcall account.
If you encounter any issues, our customer service team is happy to assist you.